Why Are My HP Printer Prints Too Light, Too Spotty, Or Have Horizontal Lines?

Is your HP Printer Prints Too Light, too spotty, or have horizontal lines? Poor-quality printouts literally impact your personal as well as professional work. However, it will be dreadful when the text on the printed pages is faded as you can hardly see some of the words. But, you don’t need to worry if getting faint prints after sending your print jobs to your HP Printer. In the blog, you will learn how to improve print quality with the least effort. So, feast your eyes!

Reasons Why HP Printer Printing Too Light

The most common reasons for receiving faded printouts are listed below. Have a short glance:

1.        Insufficient or defective HP Printer toner cartridges.

2.        A dirty or clogged printhead can also lead to your Printer Prints Too Light.

3.        An inappropriate adjustment of the transfer roller in the HP Printer.

4.        Low ink or toner density will also be one possible cause of the faint prints.

5.        Toner darkness settings are not appropriate.

Solutions To Fix HP Printer Printing Too Light Issue In No Time

Beneath, we’ve compiled the various ultimate fixing solutions. So, you need to keep an eye on the troubleshooting guide for the HP Printer Printing Too Light issue and apply the fixes. Let’s implement!

Solution 1: Perform a Hard Reset

When you do a hard reset, your printer will get refreshed from top-to-toe. Let’s perform the following steps accordingly:

1.        First, turn on your HP Printer.

2.        Now, wait until the printer is active.

3.        After that, with the printer turned on, disconnect the power cord from the rear end of the printer.

4.        Slightly unplug the power cord from the wall outlet.

5.        Wait at least a minute.

6.        After that, plug the power cord back into the wall outlet.

7.        NOTE: Make sure HP Printer’s power cord is properly connected to the wall outlet.

8.        Reconnect the power cord appropriately to the rear end of the printer.

9.        Now, turn on your printer and start attempting the print job.

If still your printer prints too spotty or gets blurred printed paper, apply the next fixing tips.

Solution 2: Clean The Ink Cartridges

Running an automated utility will efficiently clean the cartridges. So, if the ink cartridges are defective or damaged, perform the following course of action:

1.        Open the HP Printer folder on your Windows PC.

2.        Now, put a right-click on the icon for your product, and then click “Printing Preferences”. The Printing Preferences windows will then open.

3.        Now, click the “Services” tab, and then click “Service this device”. The printer Toolbox opens.

4.        Click the “Device Services” tab, and then hit the “Clean the Print Cartridges” tab.

5.        In the next pane, click “Clean”.

6.        The cleaning utility will start running, and the product will begin to print a page with an illustration.

7.        Examine this test page for the print-quality or HP Printer Printing Too Light issues.

Move on to the next solution if needed further assistance yet for the problem of the faint print.

Solution 3: Align The HP Printer Properly

If you found anything defective on the extended self-test report, then open the printer toolbox and align the printer. Here’s how to do it:

1.        Press and hold the “Cancel” button and the “On/Resume” button.

2.        Release both these buttons but only after the Check Paper and Check Print Cartridge lights blink.

3.        Now, click the “Cancel” tab once again.

4.        Press the “Copies” button.

5.        And then, click the “Paper Type” to choose the type of paper.

6.        Give a single tap on the “Start Copy – Color” button.

7.        The alignment sheet will begin printing.

8.        Carefully open the scanner glass lid.

9.        Place the alignment sheet in the face-down position on the left-front corner of the glass.

10.     Close the lid, and then tap the “Scan” button. Wait until the product finishes the alignment. The On light blinks after the alignment completes successfully.

11.     Now, try the print job again.

HP Printer Online Support For HP Printer Printing Too Light

Wasn’t the aforementioned troubleshooting technique helpful? Is your HP Printer Printing Too Light or too spotty yet? Chill! Consult us for professional HP Printer Online Support at a reasonable cost. We are experts in the problem-solving domain. So, whether your printer prints too light, too spotty or have horizontal lines, it will be eradicated in a couple of minutes.