HP Printer Nozzle Prints too light. How to fix it?

It is annoying to get faded print outcomes, especially when you have the urgency of printing some documents. Is your HP printer printing too light? Well! You are not alone. Many HP Printer users complain about faded printing outcomes while using the printer services. Many of us think that it might be due to light or heavy HP Print Nozzles, or empty print toner and cartridges. Fortunately, with some simple hacks, you can fix this issue in seconds.

This guide is highlighting some simple troubleshooting steps that can help to fix HP printer prints too light errors. Keep reading and follow the steps to get rid of issues in seconds.

 My HP printer is printing too light. How can I Fix It?

 If you are wondering why my HP Printer is printing too light, then we would like to tell you that there could be several reasons.

1. The inkjet is clogged.
2. Low ink density.
3. Low ink level.
4. Ink toner issues.

what to do to fix the printer prints too light error

Replace the Ink and Toner with a new one

 

If the problem occurs due to low ink and toner levels, replace the ink and toner with a new one. Only buy the manufacturer-recommended ink or toner for the printer, else, you may end up facing the same problem again.

Clear the Print Head

Cleaning print head is extremely important. Sometimes, it's not the ink or toner, but a dirty print head causing trouble in printing the documents. Find how to do it in the steps below:

1. Open the Control Panel.
2. Here, find out your printer in the list and click on the option.
3. Go to the properties section.
4. Go for the “Print Head Cleaning” option.

Clean the Clogged Nozzles

The HP printer printing too light error could be the result of clogged print nozzles and to fix this problem, the device needs manual cleaning. Usually, the nozzles get clogged when the print remains idle for a long time and starts printing low-quality documents.

You can perform the manual cleaning of the print head using a clean piece of cloth or cotton swab.

Increase the ink/toner density

In some of the HP printers, you get an option to change the density settings of the printer toner or ink. There could be a probability that the default settings of your device are set to low and causing the fade printouts. If your device has the ink/toner settings, open that and increase the ink/toner density. Try to take the printout.

Run the Diagnostic print

The HP printer comes with a “Diagnostic print” feature that can help you automatically troubleshoot the issue in no time. You can run the diagnostic print on the device from the printer menu and confirm which color is the prime reason behind the error.

Clean the transfer roller

If the problem is not fixed yet, try to clean the transfer roller. To do so, cut the power supply to the printer and disconnect the cable. Use a soft and dry cloth for cleaning purposes. While cleaning, make sure that:

1. Not to use the liquid for cleaning purposes.
2. Clean gently, do not apply pressure.
3. Do not remove the transfer roller or touch it.

To position the transfer roller

1. Turn off the device.
2. Remove cartridge.
3. Detach the roller.
4. Insert the roller in the correct position.

That’s all that you need to do to fix the HP printer prints too light problem on the device. Hopefully, the steps above help fix the issue in no time. If you are still unable to fix the issue, get help from the HP support team to find an instant solution to a problem based on its root cause.